|
|
|
|
SCSI2SD emulator/SSD, version 6, Revision 2020d
- Full-Size SD card slot.
- Lower profile, surface mount capacitors.
- A floppy-style berg power connector is used instead of the traditional Molex plug.
- Better performance. The hardware supports synchronous transfers at 10MB/s.
- Access to the data via USB. The SCSI2SD drives will appear when connected to a PC via USB.
With Rev 2020d, this is limited
to around 1.2MB/s (USB FS speeds) - Integrated terminator, enabled via software configuration, using SCSI2SD-UTIL6
Technical Specifications SCSI Interface | SCSI-2 Narrow 8-bit 50-pin connector. SCSI FAST10 10MB/s synchronous transfers | SD Card Interface | Full-size SD, tested up to 32GB Up to 20MB/s | USB Interface | Firmware updates, configuration, and mass-storage USB 2.0 micro-B. Mass-storage at USB 2.0 FS speeds (1.2MB/s max) | Power | 5V via floppy 4-pin drive connector, USB, or self-powered using the SCSI host termination power. 2.35W maximum (500mA) | Dimensions (L x W x H) | 10cm x 9cm x 1.5cm | Performance | Up to 10MB/s under optimal conditions. Worst-case performance is generally ~5.5 megabytes/second |
|
|
|
|
|
|
|