Home > SCSI Emulators >

ZuluSCSI RP2040
Assembled ZuluSCSI RP2040 SCSI emulator

Alternative Views:

Price: $59.00

Quantity in Stock:308

Availability:: Usually Ships in 1 to 2 Business Days
Product Code: ZULUSCSI-RP2040

SCSI ribbon cables:

SD Card:

DB25 connector:

External Power Connector:

3.5" Mounting Bracket*:
Black 3.5" plastic mounting bracket [Add $9.50]
White 3.5" plastic mounting bracket [Add $9.50]
No mounting bracket

Description Technical Specs Extended Information
ZuluSCSI RP2040 is a new member of the ZuluSCSI product family, powered by the Raspberry Pi Foundation's RP2040 microcontroller, a dual-core 133MHz ARM Cortex-M0+ processor. ZuluSCSI RP2040 Supports synchronous and asynchronous transfers, with read speeds up to 9.5 megabytes/second. A SCSI controller with FAST SCSI and synchronous mode is required to achieve maximum speeds.
ZuluSCSI is a new generation of file-based SCSI HDD & CD-ROM emulators, and represents a fusion of SCSI2SD V5, V6, and concepts from other open source SCSI emulators. Hard drive and CD-ROM drive images are stored on a standard FAT32 or exFAT-formatted SD card. The ZuluSCSI firmware looks for file names which adhere to a simple but powerful naming convention, and presents them as the drives to the SCSI host. Each image file represents a SCSI drive.

Board dimensions are 90mm by 100mm. The four M3-sized mounting hole dimensions are identical to those found on the bottom of any 2.5" hard drive, meaning you can use most commodity 2.5" to 3.5" mounting brackets/adapters to mount ZuluSCSI.
ZuluSCSI RP2040 board dimensions are identical to that of SCSI2SD V5.1/V5.2/V6.
All mounting solutions designed for SCSI2SD V5.1/V5.2/V6 work just as well with ZuluSCSI.
  • Emulates up to 7 SCSI devices simultaneously, including CD-ROM.
    Supports initiator mode (via DIP switch), allowing you to dump the contents of old hard drives to files on your SD card!
  • Speaks both SCSI-1 and SCSI-2
  • SCSI Termination is DIP-switch controlled
  • Firmware upgrade simplicity; As easy as placing a file on the SD card.
  • Highly configurable using a text-based ini file, zuluscsi.ini
  • External LED pin header for attaching remote LEDs.
  • Designed to be powered via SCSI termination power, when provided by the host
  • Optional DB25 pin header for direct installation of an external SCSI connector, in addition to the Single-Ended 50 pin IDC connector
  • Identical dimensions and mounting holes as that of SCSI2SD V5.1, V5.2, and V6, making it compatible with many existing SCSI2SD-specific mounting solutions
    SCSI bus transceivers