Home > Amiga
Sort By:
Page of 1
Amiga 3000 "ZIP2SIMM" PS2 to ZIP RAM adapter KEL 8817-200-170S-F CPU-side (A3640/3660) PCB connector KEL 8807-200-170S-F Amiga A3000/A4000 replacement PCB connector
Bare Printed Circuit board, allowing you to replace the legacy ZIP memory with standard PC/PS2 style 72 pin SIMMs.

Red PCB, Gold ENIG electroplating. Bill of materials/required components:

Description Quantity Footprint Location/Designator
PS / 2 SIMM socket, 72-pin, angled 2 Bank0, Bank1
Pin header, 1 × 3-pin, pitch 2.54 mm, straight 1 JP1
SMD resistor, 0805, 150 Ohm, 16V 1 R1
SMD-LED, 2012 (0805), red 1 D1
SMD tantalum capacitor, type C, 10µF, 16V 3 C1,C2,C3
IC adapter pins, Ø 0.45 mm, pitch 2.54 mm 73 N/A
Open Source Hardware, courtesy of Matthias Münch. Produced under commercial license granted by Matthias.

See https://www.amigaworld.de/hardware/amiga-3000-simm-zip-ram-adapter/
Factory new, CPU board side (not motherboard side) connector
Factory new. Motherboard side, for use as an Amiga A3000/A4000 replacement
Amiga 3000 "ZIP2SIMM" PS2 to ZIP RAM adapter kit with 45 degree SIMM sockets Amiga A3660 bare PCB Amiga 4000D Replica Printed Circuit Board
Bare Printed Circuit board, allowing you to replace the legacy ZIP memory with standard PC/PS2 style 72 pin SIMMs.

Red PCB, Gold ENIG electroplating. Bill of materials/required components:

Description Quantity Footprint Location/Designator
PS / 2 SIMM socket, 72-pin, angled 2 Bank0, Bank1
Pin header, 1 × 3-pin, pitch 2.54 mm, straight 1 JP1
SMD resistor, 0805, 150 Ohm, 16V 1 R1
SMD-LED, 2012 (0805), red 1 D1
SMD tantalum capacitor, type C, 10µF, 16V 3 C1,C2,C3
IC adapter pins, Ø 0.45 mm, pitch 2.54 mm 73 N/A
Open Source Hardware, courtesy of Matthias Münch. Produced under commercial license granted by Matthias.

See https://www.amigaworld.de/hardware/amiga-3000-simm-zip-ram-adapter/
Amiga A3660 Printed Circuit Board, bare. Red PCB with gold ENIG plating.
Made in August 2018, this is an exact clone of the Commodore Amiga 4000 Rev B PCB.

Red, with Gold ENIG plating