|
|
|
|
ZuluSCSI V6.4 emulator/SSD, version 6, Revision 2024a
- ZuluSCSI V6.4 currently supports synchronous transfers at up to 10MB/s, both read and write.
- Descended from SCSI2SD V6, and works like SCSI2SD V6.
- Full-Size SD card slot.
- USB-C port.
- Access to the data via USB. The ZuluSCSI V6 drives will appear when connected to a modern computer via USB.
With Rev 2024a, this is currently limited to around 1.2MB/s (USB FS speeds) - A floppy-style berg power connector.
- Integrated active SCSI termination, enabled via software configuration, using ZuluSCSI-V6-util
Technical Specifications SCSI Interface | SCSI-2 Narrow 8-bit 50-pin connector. SCSI FAST-10 10MB/s synchronous transfers | SD Card Interface | Full-size SD, tested up to 512GB | USB Interface | Firmware updates, configuration, and mass-storage USB-C, Mass-storage at USB 2.0 FS speeds (1.2MB/s max) | Power | 5V via floppy 4-pin drive connector, USB, or self-powered using the SCSI host termination power. 2.35W maximum (500mA) | Dimensions (L x W x H) | 10cm x 9cm x 1.5cm | Performance | Up to 10MB/s under optimal conditions. Worst-case performance is generally ~5.5 megabytes/second |
|
|
|
|
|
|
|