 |
 |
 |
|
SCSI2SD V5.0c emulates a SCSI-I or SCSI-2 hard drive using a micro-SD memory card.
Version 5.0c is assembled in the USA.
SCSI2SD V5.0 features removable resistor pack termination, and supports emulation of up to seven SCSI devices/IDs, using scsi2sd-util
Technical Specifications| SCSI Interface | SCSI-2 Narrow 8-bit 50-pin connector. Supports asynchronous transfers only. | | SD Card Interface | Standard SDSC (1GB maximum size) SDHC, SDXC (No maximum, 200GB tested) | | Power | 5V via standard Berg (floppy style) connector, USB, or SCSI BUS powered (requires the SCSI host to supply terminator power) | | Dimensions | 9cm x 6cm x 1.2cm |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Built-in active terminator.
- Emulates up to 7 SCSI devices simultaneously
- Supports sector sizes from 64 bytes to 8192 bytes
- Firmware updatable over USB
- Highly configurable over USB, using scsi2sd-util
- Selectable SCSI ID
- Selectable parity support
- Enable/disable Unit Attention Condition
- Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
- Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities).
- External LED connector
|
|
|
|
|
|
|