 |
 |
 |
 |
ZuluSCSI V1.1 for Laptops, PowerBooks, and anything else that's got a 2.5" SCSI interface.
ZuluSCSI is a new generation of file-based SCSI HDD & CD-ROM emulators, and represents a fusion of SCSI2SD V5, V6, and concepts from BlueSCSI firmware. Hard drive and CD-ROM drive images are stored on a standard FAT32 or exFAT-formatted SD card. The ZuluSCSI firmware looks for file names which adhere to a simple but powerful naming convention, and presents them as the drives to the SCSI host. Each image file represents a SCSI drive.
- Maximum read speeds with ZuluSCSI V1.1 can be up to 3.9 megabytes/second, with a suitable SCSI controller.
- ZuluSCSI uses the same SCSI command handling code as SCSI2SD V6, compatibility with nearly all devices that speak both SCSI-1 and SCSI-2 is extremely high.
Firmware updates are as simple as placing a file on a FAT32 or exFAT-formatted SD card, inserting it in the SD card slot, and applying power to the ZuluSCSI. A firmware recovery mechanism is also provided.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Emulates up to 7 SCSI devices simultaneously, including CD-ROM
- Speaks both SCSI-1 and SCSI-2
- SCSI Termination is DIP-switch controlled
- Firmware upgrade simplicity; As easy as placing a file on the SD card.
- Highly configurable using a text-based ini file, zuluscsi.ini
- External LED pin header for attaching remote LEDs.
- Designed to be powered via SCSI termination power, when provided by the host
- Optional DB25 pin header for direct installation of an external SCSI connector, in addition to the Single-Ended 50 pin IDC connector
- 74LVTH125 SCSI bus transceivers
|
|
 |
 |
 |
 |

|